The Various Pit Boss Laredo 1000 Problems Explained

The Pit Boss Laredo 1000 has gained immense popularity as a pellet grill renowned for its versatility and affordability. It is designed to offer backyard enthusiasts and barbecue aficionados a convenient way to smoke, grill, and bake a wide variety of dishes. With its spacious cooking area, digital temperature control, and innovative features, the Pit Boss Laredo 1000 has gained a considerable following among grilling enthusiasts.

However, despite its popularity, it can be frustrating to invest in a Pit Boss Laredo 1000 and encounter some problems. In this article, we explore some of the reported problems with the Pit Boss Laredo 1000 and discuss potential solutions or workarounds.

Pit Boss Laredo 1000 Problems

Here, we are  listed all the common Pit Boss Laredo 1000 problems and their solutions for you 

1. Excess Or Discolored Smoke 

As you cook your favorite meat, you might notice that either there is excess smoke or the color is not right. Both of these issues stem from the same causes, which include:

• There is grease buildup within the grill 
• You are not using high-quality wood pellets 
• Blockages in the fire pot are causing such smoke 
• The air intake for the fan is inadequate

Any of these problems can cause excess or discolored smoke in the Pit Boss Laredo 1000. Fortunately, a few steps can help you overcome this problem. First, if there is a grease buildup, you must thoroughly clean the grill to rectify this issue. 

You can also use high-quality wood pellets to ensure consistent smoke and prevent the flame from dying out after every while. Next, check the fire pot and remove any blockages you notice, such as moisture-filled pellets that can dry out the fire. Finally, if the air intake is the issue, you can check the fan and make sure it is not blocked. 

Sometimes dirt and debris can cause the fan to block. You can clean it thoroughly so that this doesn’t continue to be an issue for the grill. 

2. There Are No Power Lights On The Control Board 

You've turned on the control board but failed to see any power lights on it. If that is the case, then here are some of the top causes for this issue: 

• Control board is faulty 
• There is tripping of the GFCI 
• Fuse of the control board has been blown 
• Disconnection from the power source

The first problem we have stated is a faulty control board. When you see this issue, you need to immediately contact Pit Boss customer support. Let them know the issue, and they will take the relevant steps to replace the faulty control board as soon as possible. 

Next, another issue could be the GFCI tripping. You have to take out the access panel of the hopper and ensure that all the connections of different wires are connected properly and dry. Another option is to guarantee that it receives a ten-amp service for optimal functioning. 

Thirdly, it is common for the fuse to blow away because of various reasons. You will have to take out the hopper access panel for this and press the tabs that hold the control board together. Then, you must pull the controller within the hopper to release it. 

If there is a broken wire or the fuse is black, then it will require manual replacement. Finally, disconnection from the power source is another problem you can easily fix. All you have to do is guarantee that the unit is plugged into a power source that works. 

You can also reset the breaker and check the wire connections. Any damage or breakage can also lead to this problem. 

3. ErP Error Code 

Error codes are common with many grills, and each of them means something unique. ErP error can mean two things: the unit did not turn off properly when you used it last, or there was a power outage when the grill was used. Safety features within the grill prevent the grill from restarting automatically.

A possible solution to this problem is that you can press the power button to shut the grill down. Then, wait for two minutes and press the button again so the grill can restart. However, if you still notice this code, then it is time for you to contact customer support for your queries. 

4. Failure To Maintain Temperature Stability 

Temperature stability is crucial for your food to cook perfectly. Sometimes, grills can face some issues that can lead to the failure of maintenance of this stability, which includes:

• Problems with the grill probe 
• The fuel quality is poor, or you didn't add enough, or there is a blockage in the auger 
• Airflow from the burn pot is inadequate 

For problem number one, you need to check the probe and see if there is any damage or if it is dirty. You can follow the cleaning process if it is dirty. Any damage to the parts will require replacement, which is when you must contact Pit Boss. 

Problem number two requires you to check the hopper to see if the pellets are adequate. Replenish the pellets if you think that they are not sufficient for the cooking process. On the other hand, always use high-quality pellets for the best results. 

You can also check for blockages by witnessing the feeding system and taking out any moist or poor pellets. It is important to clean and care for your Laredo 1000 so you don’t incur such issues. Finally, the third problem will require a solution from the burn pot. 

Open the burn pot and check if there is a buildup of ash or any other blockages. When there is ash buildup, you must clear it all out. You will also have to check the fan to see whether it is working in optimal condition and the air is flowing. 

Sometimes, the auger motor can also fail or refuse to work, which is why we recommend you check how it is operating when such issues take place. If you have taken all the steps, then it is time for you to see if the grill works. 

You can set the temperature to your liking, wait for ten minutes, and then check whether the smoke is vibrant and bright. If that happens, it means that you have fixed the issue. 

5. ErH Error Code 

Finally, the ErH error code is another common one that you might notice on the Laredo 1000. It means that the grill is overheating because of too much fuel or a grease fire. Immediately turn off the power button and let the grill cool. 

Then, take all the steps to clean and maintain your frill. After that, remove the pellets, and position the components in the right place. Next, turn on the power button, select the temperature you want, and begin using your grill. 

Final Thoughts 

All of these are common Pit Boss Laredo 1000 problems that you can easily fix by following our stated guidelines. In any case, if the issue doesn't fix, your first plan of action should be to contact Pit Boss. The customer support is exceptional, and the company will do its best to help you out. 

So, you don’t need to worry about spending hundreds of dollars on the Laredo 1000. If there is a problem, you can count on the fact that it will be fixed.